Doll Bar & Grill
The Lobby => Fix-it Shop => Topic started by: Phil on April 18, 2023, 05:57:24 PM
-
She fell a few weeks ago, the right hip froze, haven't been able to move the leg forward. It will swing out to the side and backward, but not forward. I cut into the hip, couldn't see anything. Attempted to move it forward again and it gave way.
The bolt was notched against the nut, but t moved and ws able to remove it. The Bolt holding the base of the joint to the skeleton will not as yet move. I messaged Patrick, he said he'd look around the shop for a spare hip joint.
Phil
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-18_at_3_44_38_PM.png)
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-18_at_3_51_02_PM.png)
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-18_at_3_51_10_PM.png)
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-18_at_4_34_06_PM.png)
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-18_at_4_33_37_PM.png)
-
Texting with Patrick the other day, say's he can send me the part I need to fix her hip. I just have to get the other bolt and nut undone, that will be the hardest part of this operation.
Phil
-
Best wishes for a speedy recovery.
-
Best wishes for a speedy recovery.
Thanks! looks like I'll have to grind the end of the bolt down to the nut having it be easier to remove. I can't tell what was done to it, maybe the touch of a welder? Looks too intense to have been peened, what do I know?
Phil
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-21_at_8_33_28_PM.png)
-
Managed to get the nut off of the bolt holding the base of the hip hinge, what a bite that was. Patrick says he shipped the part today. I'll never know what caused the hinge to fail other than the hinge itself was weak and under a lot of stress since the forward motion of the leg is facilitated by the base of the hinge piece rotating under the head of a high torqued bolt, WTF!
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-24_at_6_48_39_PM.png)
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-24_at_6_47_26_PM.png)
-
Sorry this happened to your wonderful Natalie. Stick with, hang tough.
JB
-
Sorry that this happened.
Yeah I think you're right that the original part failed by metal fatigue. You can see many stress cracks radiating from the bolt hole.
-
Thanks guys, She's resting easy having gone through half of the vicodin reserve and a few glasses of rose.,
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-04-25_at_9_35_57_PM.png)
-
She can still stand, that's a break!
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-05-03_at_7_48_25_PM.png)
And looking as though she want's to have her way with me...
(http://www.ourdollcommunity.com/gallery/albums/userpics/Screen_Shot_2023-05-03_at_7_50_16_PM.png)
Spinner Cameltoe
(http://www.ourdollcommunity.com/gallery/albums/userpics/normal_Screen_Shot_2023-05-03_at_7_48_09_PM.png)
-
Glad to see she's all fixed up! 8)
-
Literally, outstanding :thumb:
-
Well done Phil , welcome to the world of doll surgeons