Inserts

[Ceej]

Smoke, that's a nice find!

I'm certainly thinking of ordering a set myself.

[JB]

The testing continues, I really like the texture and can feel it the whole time. I have been asked to clarify something that is important but somewhat embarrassing. The inside if the stock insert seems rather small, it is very stretchy. So went I got the inserts I tested one outside of a doll. Like a fleshlight. With me in there the thing was huge. My girth is a bit above what is considered "average", let's leave it at that. The point is each individual will have to consider how much and where to trim.
  At this price it is a very nice textured insert. I would do it all over again. It has added a new level of fun to doll sex.

To answer brother Smokes questions, I think Xelex was looking for a way to "lock" in the insert inside the doll during playtime. Perhaps the saw what Realdoll had done from the beginning and copied it. I try not to ponder the depths of the oriental mind.
 
"JB I have a question for you. Is the insert Too large in all of your dolls? I know with my girls, some of the Abyss inserts can be a bit large for a petite but  fit a full size Realdoll  better." Smoke I guess the pictures don't make it clear. To me these inserts seem huge. I did install one on Amie (body E, my biggest girl) There was no way she was going to let me"in". That is the point here. This is an ideal situation to make a custom fit insert. I will highly recommend the flesh light approach. When I did I thought to myself, there is no way this will ever work. The trimming worked wonderfully.

Any other questions, feel free to ask.
The trimmed insert worked very well in Becca's body A this morning.
JB

[Smoke]

JB kindly granted me permission to post  my insert review in his thread here rather then start a new topic on inserts . 


I ordered Zelex inserts from      https://www.coeros.com/product/zelex-new-silicone-sex-doll-insert-vagina/


I received an e-mail saying my order has been processed and shipped. Tracking as of today says my order has departed from  transit airport and is 6 days out. 

[Ceej]

My order is in too. 

[JB]

Now see? The first thing I tried to tell you are: these inserts are huge! Next, I provided really bad pictures. However with a bit of work, well, let me know.

JB

[Begog]

Good find! Abyss will surely not like this, but it's their fault for not having made available inserts with more variety in internal textures.

And charging an arm and a leg for what amounts to a re-useable condom. Shameful...

This just in!!!   

Mississippi man has penis amputated after unfortunate encounter with Chinese sex doll insert.   Film at 11:00   

If he was too dumb to clean an insert or too broke to buy a new one (2 for $25), he doesn't DESERVE a doll. Likely, he was in that never-cleaned, musty asshole again. 
Shoulda cleaned it. 

[Ceej]

After over 3 weeks, the email notifying me that my order is finally on its way, finally came this morning.....

Followed by my parcel this afternoon. 

JB, you're right, these inserts are big!  I should have some free time soon to modify and try one out! 

[JB]

Ceej, I was wondering about this! Good news, now get to cutting!
JB

[Smoke]

I've had my inserts for quite a while now. I finally got around to the start of a review. So pay attention!   








The very lovely Miss Lana Rae, has graciously agreed  to take time out of her busy schedule, to assist in this little endeavor. Thank you Lana. 









Came nicely packaged in bubble wrap inside a cardboard box.






Unwrapped and positioned to the right of a standard Abyss type D insert.

Now there is no question that these inserts are significantly larger then the standard Abyss insert.

But lets find out if the severe modification of said inserts is really necessary. 





First we are going to establish the depth of cavity that the insert is going to be installed in.

The zip tie on the wand represents the approximate location of the outer lips of the insert.








The aftermarket insert is for sure longer and will, in all likely hood ,need to be trimmed for length. 



But what about the girth? Is all the hackenstiening of the insert necessary? 


Lets find out. 

























The Abyss Type F standard insert installed for reference.


























Lana seems to take the girth like a champ. The insert can be compressed enough into her cavity for it to go all the way in, and not look  half bad. 













But left to it's own devices, the insert wants to push it's way  back out.

JB mentioned  that his personal "girth" is above average. I have no such issue as I was gifted the "White Man Curse" .   
So, at this point, I may be able to just  trim the insert  to length and see how that goes. This will be evaluated after further testing is completed. 


To be continued.

[Ceej]

Sweet Review Smoke!  Thanks, it helps

I paid attention.  ......  I payed attention that Lana looks very sultry. 

I have my inserts too. They will need to be trimmed for length as well.

[Smoke]

Thank you Ceej. 


Lana is always willing to volunteer for a good cause. 






Got around to trimming this bad boy..



































At this point I pulled the wand out of the insert.The wand was used merely to provide some rigidity to ease the cutting process.

Blob of sil-poxy on the end cap. Line up the mold seams on the cap and the stock and squish it together.










Let it cure for half an hour.






Its not going to be perfect. It doesn't need to be. No one is going to see it.








What you are left with is an uneven seam with little perforations around it. Run a bead of sil-poxy around it to seal it up. . Smooth out the bead and let it cure. Done.!

[JB]

I do believe that Lana is enjoying all this!
JB

[Smoke]

I do believe that Lana is enjoying all this!
JB

Of course she is JB. She is a little Diva. 






The end result. The insert is no longer trying to push it's way out. Further testing is going to dictate as to whether the  insert needs to be shaved down or not. 

And here now I feel it's important to make some points.

1) Results are going to vary based on the individual and the doll. It's important to do the ground work yourself and determine what sort of modification is best for you and your doll.

2) These are aftermarket silicone inserts aimed at, I'm not exactly sure.    But Since they are the approximate size of a Realdoll insert
one can only assume that they are aimed at the real doll crowd. 

3) Bang for the buck!  Pun definitely intended.    I paid $89 US for two of these inserts. Currently for a , as in single, ( 1 )  OEM Abyss insert they are asking $350 US.  No Brainer. 





I want to thank JB for graciously allowing me to post my review in his thread and for first introducing us to  the existence of these inserts. . .

I am going to call this (My) review complete. If in fact further modification is necessary ,for which at this point I feel is highly unlikely, I will update. 

[Doll_Master]

Not sure who enjoyed it more, Lana or me  thanks for the great tutorial Smoke. If you can save a few bucks why not eh! 

[JB]

The thing is, Abyss never tried to add super texture to an insert. So many of us asked them to. So we found a nice alternative!
Come on RD, 350.00 for a silicone pussy? I have 8, I can be judgemental .